Class TSampledData
Unit
bsFhir_r4
Declaration
type TSampledData = class(TElement)
Description
A series of measurements taken by a device, with upper and lower limits. There may be more than one dimension in the data. If the element is present, it must have a value for at least one of the defined elements, an @id referenced from the Narrative, or extensions
Hierarchy
Overview
Methods
Properties
Description
Methods
 |
constructor Create; override; |
|
|
Properties
|
property origin : TQuantity read Getorigin write Setorigin; |
|
The base quantity that a measured value of zero represents. In addition, this provides the units of the entire measurement series.
|
|
property period : Double read Getperiod write Setperiod; |
|
The length of time between sampling times, measured in milliseconds.
|
|
property periodElement : Tdecimal read GetperiodElement write SetperiodElement; |
|
|
|
property factor : Double read Getfactor write Setfactor; |
|
A correction factor that is applied to the sampled data points before they are added to the origin.
|
|
property factorElement : Tdecimal read GetfactorElement write SetfactorElement; |
|
|
|
property lowerLimit : Double read GetlowerLimit write SetlowerLimit; |
|
The lower limit of detection of the measured points. This is needed if any of the data points have the value "L" (lower than detection limit).
|
|
property lowerLimitElement : Tdecimal read GetlowerLimitElement write SetlowerLimitElement; |
|
|
|
property upperLimit : Double read GetupperLimit write SetupperLimit; |
|
The upper limit of detection of the measured points. This is needed if any of the data points have the value "U" (higher than detection limit).
|
|
property upperLimitElement : Tdecimal read GetupperLimitElement write SetupperLimitElement; |
|
|
|
property dimensions : Int64 read Getdimensions write Setdimensions; |
|
The number of sample points at each time point. If this value is greater than one, then the dimensions will be interlaced - all the sample points for a point in time will be recorded at once.
|
|
property dimensionsElement : TpositiveInt read GetdimensionsElement write SetdimensionsElement; |
|
|
|
property data : TSampledDataDataType read Getdata write Setdata; |
|
A series of data points which are decimal values separated by a single space (character u20). The special values "E" (error), "L" (below detection limit) and "U" (above detection limit) can also be used in place of a decimal value.
|
Generated by PasDoc 0.15.0.
|